KEYPHRASE HERE (NOT JUST A LIST OF KEYWORDS)

Home : Log In : Register : Account : Basket : Checkout
Brands
 
Shopping Cart
0 items
 

Hondata CPR Kit

Hondata CPR Kit
Click to enlarge
Price: $850.00
Availability: In Stock
Model: Ignition
Manufacturer: Hondata
Average Rating: Not Rated

Available Options:
Coil Plate:
Distributor:
Billet Distributor Cap:
NGK Iriidium Spark Plugs (4):

B & R Fittings has put together a complete kit for the hondata CPR. It comes with:

-Hondata CPR unit

-B & R Fittings coil plate

-B & R Fittings Billet Distributor Block off Cap

-4 Honda OEM K-seies Coils

-4 NGK iridium sparks plugs. (please consult your tuner for the correct ones, or give us a call if your not sure)

 

Cap L - Fits most B16, B18A/B, D15, D16, H22, and H23 distributors

 

Cap R- Fits most US and JDM B18C/B18C1/B18C5 (GSR/Type R) distributors.

 

 

 

NOTE: You need to have a b-series motor with a vtec head for this kit to work.

 

From hondata's website. 

Hondata Coil Pack Retrofit (CPR)

Overview

The Hondata Coil Pack Retrofit (CPR) allows the use of 'coil on plug' individual ignition coils on engines with distributor based ignition systems (D, B, F and H series Honda engines).  It does this by replacing the stock coil and ignition with an electronic circuit which can drive igniter type individual ignition coils, such as used on later model Honda engines. A Hondata S300system and US OBDI ECU are required.


How much does the Hondata CPR cost?

$395

What does the Hondata CPR come with?

The Hondata CPR comes with a wiring harness for your coil packs, a coil pack controller and fly leads for connecting to your distributor and ECU. The CPR is typically positioned next to the ECU inside the car.

Benefits
  • More spark energy than a single coil, allowing a larger plug gap and fewer misfires.
  • Individual coils are more durable and less likely to fail than the stock igniter and coil.
  • Additionally, the Coil Pack Retrofit can drive a CDI controller if desired.
Requirements
  • US OBDI ECU (not included).
  • Hondata S300 system (not included).
  • 4 x coils, Honda part number 30520-RRA-007 
Optional parts
  • 4 x coil seals, Honda part number 30522-RNA-A01 (approx $19 retail)

These coil seals provide a tighter fit than those supplied with the 30520-PVF-A01 coils.

Notes
  • Resistor plugs must be used.
  • The coils require a method of retention. B16A, B18C & F22A engines may use the stock plug cover. Other engines require an alternative method of coil retention (not supplied).
  • This is a race product. Cranking times may be increased over a stock ignition set up.
  • For detailed installation instructions click here.
FAQ

- Does the CPR work with OBD1 JDM (square) ECUs

No. This ECU has different output circuitry which is incompatible with the CPR.

- Can I remove the distributor?

No. It is needed for the timing signals. See the CPR help file for more details.

- Is the CPR wasted spark?

No, each coil only fires once per two engine revolutions. This keeps the coils cooler.

- What coils can I use?

Any non-motorcycle Honda coil which has the larger style plug - most 2005-2009 coils will work, however we have found that the 30520-PVF-A01 part is the best length.

- Does the S300 need to be modified?

No.

Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Hondata CPR Kit
Click to enlarge